Fitting Guide – Vertical Blinds

Recess Fitting

It will dependent you have timber steel or concrete as a window lintel, however screws and plugs will be supplied with your blind.

1. Measure the depth of the handle (if there is one) to ensure the brackets are fitted forward enough to allow the blind to operate without hitting the blind. For Most windows this is normally about 90-100mm.
2. Mark with a pen where the bracket holes will be. The drill a 3mm pilot hole. If you go into wood then use the screws to fix the brackets. Otherwise you will need to drill a bigger hole and use plugs for fixing.
3. To fit the rail into the top brackets ensure the front is in first then push the rail up into the back of the brackets until you hear a click.
4. Ensure the P-clip is fitted with the chain not so tight but tight enough so the blind opens and closes easily.
5. Attach the Louvres and bottom chain then check the blind is operating properly.